Pulsafeeder Eclipse Series

The innovative technology behind Eclipse supports its ability to handle the most corrosive chemicals with a simple-to-service, front pull-out design. Eclipse is available with wetted components in completely non-metallic construction, 316LSS, and Alloy C. These material offerings ensure corrosion resistance over a wide range of chemicals and process conditions. These pumps are magnetically driven to eliminate mechanical seal wear and leaks associated with rotating seals. The patented bearing design promotes constant lubrication.

METALLIC

  • Magnetically driven, eliminating the need for costly mechanical seals
  • Patented renewable housing liner reduces repair costs
  • One-piece gear and shaft assembly eliminates common gear failures at the keyway
  • Front pull-out design - makes for easy service and maintenance in place
  • Zero leakage, zero emissions of hazardous or regulated chemicals
  • Sealless design
  • Fully encapsulated magnets
  • Piping and electrical stay in place

NON-METALLIC

  • All wetted components are completely non-metallic, not lined
  • Pump housings and gears are made of engineered composites, magnetically driven, and require no mechanical seals
  • Zero leakage, no emissions of hazardous or regulated chemicals
  • One-piece gear and shaft assembly eliminates common gear failures at the keyway
  • Fewer parts and material options means simplified ordering and inventory
  • Front pull-out design - makes for easy service and maintenance in place
  • Engineered composite fluoropolymer provide superior chemical resistance, lighter weight, shorter lead-times
  • Modular design allows for the pump ports to be mounted in 45° increments (to a full 360°, vertical, horizontal, or any configuration imaginable)

E02 Model

Flow
  • up to 0.45 gpm (1.7 lpm)
Pressure
  • up to 150 psi (10.3 bar)
Temperature
  • up to 200°F (93°C) Non-Metallic Models
  • up to 450°F (232°C) Metallic Models
Viscosity
  • up to 1,000 cPs

E05 Model

Flow
  • up to 1.6 gpm (6.1 lpm)
Pressure
  • up to 150 psi (10.3 bar)
Temperature
  • up to 200°F (93°C) Non-Metallic Models
  • up to 450°F (232°C) Metallic Models
Viscosity
  • up to 100,000 cPs

E12 Model

Flow
  • up to 3.5 gpm (13.2 lpm)
Pressure
  • up to 150 psi (10.3 bar)
Temperature
  • up to 200°F (93°C) Non-Metallic Models
  • up to 450°F (232°C) Metallic Models
Viscosity
  • up to 100,000 cPs

E25 Model

Flow
  • up to 7.4 gpm (28 lpm)
Pressure
  • up to 150 psi (10.3 bar)
Temperature
  • up to 200°F (93°C) Non-Metallic Models
  • up to 450°F (232°C) Metallic Models
Viscosity
  • up to 100,000 cPs

E75 / E125 Models

Flow
  • up to 33 gpm (125 lpm)
Pressure
  • up to 150 psi (10.3 bar)
Temperature
  • up to 200°F (93°C) Non-Metallic Models
  • up to 450°F (232°C) Metallic Models
Viscosity
  • up to 100,000 cPs