Blog

Viscosity is a measure of a liquid’s resistance to flow. And you don’t need to work in a laboratory to observe this. Anyone who’s spent any time in the kitchen has observed a variety of liquids with a wide variety of viscosities.

Flange standards used on Viking pumps have been in place for over a century so EVERYONE should be experts on this now…right? It turns out not so much. There are various standards and various design differences in each standard. AND the standards have evolved over the years, leading some to use obsolete terms which only compounds the confusion. The following should help clear up some of this…

Customers don’t ask me to listen to quiet pumps. This is symptom #1 of a cavitating pump. The pump is loud. Descriptors like “growly”, “rumbling”, or “gravelly” are used to describe the atypically loud sound coming from the pump. “Does it always sound like this?” I ask.“No, it was fine in the fall, but it’s been loud all winter.”

Millions of homes around the world are fitted with water heating devices such as boilers or water supply heaters. Should they overheat, pressures can rise internally until the tank ruptures. Though extremely rare, this does happen and can even propel a water heater like a rocket through the floor and roof of a dwelling. So how can we sleep peacefully each night with the…

It’s typically impossible to see inside pipes and tanks. Industrial pipes are usually steel or stainless. Even the occasionally used PVC is typically opaque. But on the day of this customer visit, they had a sight glass placed in a horizontal run of pipe which permitted a peek inside…

Unlike most of my colleagues I didn’t start out with a mechanical background.  While they were studying kinetics and machine design, I was studying digital electronics and industrial power.  When I started my career in the world of pumps, I had to learn a whole new set of concepts.  What was surprising was that while the terminology may be a bit different, the concepts are…

Long before Covid-19 many of us, myself included, have been sidelined by illness.  During this period of downtime, we rest and minimize physical activity.  Post-illness we’re eager to resume our normal lifestyle, but doing so without preparation can lead to difficulties, even injury.  For idled pumping equipment the same principle applies.…

In the world of positive displacement pumping, reduced speed operation is a common requirement.  High viscosity liquids, shear sensitive liquids, abrasive liquids, or any combination thereof require the pump speed to be reduced from synchronous motor speeds.

One of the biggest limitations of a traditional centrifugal pump is its inability to reverse the direction of flow. By design it can only be run in one rotation and one direction of flow. Liquid enters the eye of the impeller at the suction port (typically on the front of the pump), is pushed out radially, and exits the pump at the discharge port (typically on top of the pump…

A gentleman once contacted me to let me know that he’d cracked a head, an impressive, but not entirely unheard-of feat.  When I asked how this had happened he admitted “well, I was wailing on it pretty hard”; I appreciated his honesty.  What followed was a 30-minute conversation full of mis-assumptions and confusion.  At the conclusion I discovered that he was not talking about a head (as in…