Pipeline Injection

GP 410/414 Pipeline Injection Pump

Series GP-410, GP-414

Durable Construction

  • Heat treated shaft and spur gears provide reliable service
  • Internal surfaces are hardened to increase wear resistance

Multiple Sealing Options

  • Type 1 component seal standard
  • Cartridge seal and balanced seal options available
  • Back pull-out seal design allows seal changes without disturbing piping or requiring unit realignment

No Ball or Roller Element Bearings

  • Heavy duty bushings support shafts on either side of the gears
  • DU bushings to ensure long service life

Modular Porting Design

  • Standard 180⁰ ports with weld neck adapters to accommodate the flange of your choice
  • Port design allows for multiple interchangeable flange options
  • Common Port Location (CPL) feature allows for installation of lower flowrate pumps when well production decreases without welding or piping modifications

Compact Footprint

  • 7’ unit length on largest pump and motor assembly
  • Motor speed operation eliminates the need for gear reducers or belt drives
  • Units include small, rigid formed steel baseplate complete with spacer coupling and coupling guard

Features

capacity

210 GPM

pressure

1500 PSI

viscosity

2500 SSU

temperature

0 to +350 °F

Specs

GP 425 Pipeline Injection Pump

Series GP-425

Multiple Sealing Options

  • Single cartridge mechanical seal standard
  • Double and tandem cartridge mechanical seals available
  • Capable of accepting an API 682 seal

Durable Construction

  • Heat treated shaft and spur gears provide reliable service
  • Internal surfaces are Vitek hardened to increase wear resistance

Modular Port Design

  • 6”, 180⁰ 4 bolt ports standard
  • Weldneck port adapter design allows for multiple interchangeable flange options
  • Common Port Location (CPL) feature allows for installation of lower flow rate pumps when well production decreases without welding or piping modifications

Compact Footprint

  • External gear design is significantly more compact than screw, reciprocating, and centrifugal technologies
  • Direct drive, motor-speed operation eliminates the need for gearboxes or belt drives
  • Standard inverter duty rated motors

Reduced Maintenance

  • Back pull-out seal design and spacer coupling eliminate the need to disturb piping or perform alignments during seal changes
  • Rigid structural steel base with milled mounting pads and jacking bolts for ease of field alignment
  • No pulsation dampeners, gear reducers, belt drives, or additional equipment to service and maintain

Features

capacity

610 GPM

pressure

1500 PSI

viscosity

550 cP

temperature

0 to +350 °F

Specs

Sample / Sump Pump

Series SG-05

  • Needle bearings provide high pressure capabilities
  • Close-coupled motor mount or foot bracket options to match space or motor requirements
  • Available with or without internal relief valve for over pressure protection on the pump and system

Options include:

  • Sealing / Coupling:
    • Lip Seal, Component Mechanical Seal, Cartridge Mechanical Seal, Mag Drive
  • Mounting:
    • Foot Mount, Motor Mount for IEC & NEMA Motors (Close-Coupled), Vertical In-Line

Features

capacity

190  GPM

pressure

100 PSI

viscosity

1,000,000 SSU

temperature

-40 °F to +450 °F

Specs

Sample / Sump Pump

Series: 75, 475

  • NEMA C-face mount for easy installation and a small footprint
  • Simplified rotor retention system, economical for medium duty applications
  • Proven successful on sample and pump applications for LACT duty service
  • Available with or without internal relief valve for over pressure protection on the pump and system

Options include:

  • Sealing
    • Component Mechanical Seal
    • Lip Seal

Features

capacity

30  GPM

pressure

250 PSI

viscosity

7,500 SSU

temperature

-60 °F to +350 °F

Specs

Bolted Lid Strainers

Features & Benefits

  • Strainer bodies available in ductile iron
  • Lid vent, pressure differential gauge ports, and bottom drain are all standard
  • Stainless steel baskets with 3/16” perforation holes standard (no mesh)
  • Basket lining available in 10, 20, 40, 60, 80 or 100 mesh
  • Baskets provide maximum hoop strength to prevent distortion or basket damage
  • Ductile iron can be used for steel requirements in chemical, petrochemical and pharmaceutical industries

Viking Quality Construction

  • High-quality, easy-to-clean simplex strainers
  • Designed for chemical, petrochemical and most general fluid-flow applications
  • Raised face flanges available for 2, 3 & 4 inch piping
  • SS basket and screen are available in no mesh, 10, 20, 40, 60, 80 or 100 mesh
  • Nominal capacities range from 100 to 400 GPM
  • Pressures up to 640 PSI
  • Strainer bodies and lids are available in ductile iron

Low Pressure Drop

Viking Bolted-Lid Strainers are designed for minimal pressure drop through the unit. Pressure drop is minimized by the inclined position of the strainer basket adjacent to the porting. This provides smooth flow patterns not found in conventional basket type strainers.

Specs

Transload Pump

  • Heavy duty antifriction bearing shaft support for higher pressure and extended pump life
  • Motor speed operation eliminates speed reduction equipment on thinner liquids
  • Pressure lubrication system automatically lubricates the idler bushing, increasing pump life
  • Space-saving mounting configurations available to better match your installation needs:
    • Foot Mount
    • Motor Mount (Close-Coupled NEMA and IEC)
    • Vertical Inline Mount

Options Include:

  • Sealing / Coupling:
    • Component Mechanical Seal
  • Porting:
    • Opposite (180°), NPT, Flanged (ANSI or DIN)
  • Mounting:
    • Foot Mount, Motor Mount (Close-Coupled), Vertical or Horizontal Inline Mount

Features

capacity

580  GPM

pressure

250 PSI

viscosity

25,000 SSU

temperature

-40 °F to +350 °F

Specs

Contact Our Experts

Yohance Henry, M.A.Sc., M.Eng., P.Eng.
Product Manager
Email: yhenry@idexcorp.com
Phone: 519-259-4268

Steve Kettner

Steve Kettner
National Sales Director
Email: skettner@idexcorp.com
Phone: 403-831-7756